|
Hose Tools and AccessoriesDixon F100 Band Clamp Hand Tool (for 3/8" and 5/8" Band Clamps)
Dixon F100 Band Clamp Hand Tool (for 3/8" and 5/8" Band Clamps)
Part # : F100
Price : $296.03
The F100 Band Clamp Hand Tool is for use with both 3/8" (adapter required) and 5/8" Band Clamps. Use this convenient tool for installing both F and K Series Center Punch Band Clamps as well as the Smooth ID Center Punch Clamps. Features steel construction and measures in at 13 inches. Replacement parts for the F100 Band Clamp Tool are available, please contact us for details. Operating Instructions for the F100 Installation Tool- Hold tool as shown with ball handle all the way forward. Insert clamp and push the end entirely into the tool until the lock is held in pusher housing jaws.
- Slip the hose with nipple inserted into the clamp and locate clamp directly over groove - (position of groove can be laid out on hose with chalk), tighten the clamp with downward strokes of ball handle, using short strokes after initial slack is out so that ball handle finishes in down position.
- Hold the tool with clamp resting on Vee block, vise or other solid surface. Swing punch head down against lock and strike hard with mallet; this locks the clamp. Raise punch head to free punch. Hold hose to keep from turning and raise both handles of tool up together which will break off band at lock.
(optional) Peen corners of the lock down smooth. To remove cut off end from tool, operate ball handle to work it through holding dog. Then press release lever and pull strip out toward rear of tool. Instructions for using adapter to apply 3/8" width clamps- The F100 tool described above, as shipped, is ready for use in applying all sizes of 5/8" standard and heavy duty hose clamps. To apply the 3/8" wide clamps use the adapter (F-229, sold separately). To insert the adapter, hold the tool with the punch head raised and place the adapter under the pusher nose with the bent ends up and push back until the shoulder rests against the front of the pusher nose. The F-229 clamp adapter under the pusher nose centers the narrower clamp in the tool.
Safety Note Details:
Prop 65 Warning:
Rotate your screen to see additional columns.
|
1 Year Limited Warranty DetailsDIXON VALVE AND COUPLING COMPANY (herein called "Dixon") warrants the products described herein, and manufactured by Dixon to be free from defects in material and workmanship for a period of one (1) year from date of shipment by Dixon under normal use and service. It's sole obligation under this warranty being limited to repairing or replacing, as hereinafter provided, at its option any product found to Dixon's satisfaction to be defective upon examination by it, provided that such product shall be returned for inspection to Dixon's factory within three (3) months after discovery of the defect. The repair or replacement of defective products will be made without charge for parts or labor. This warranty shall not apply to: (a) parts or products not manufactured by Dixon, the warranty of such items being limited to the actual warranty extended to Dixon by its supplier; (b) any product that has been subject to abuse, negligence, accident, or misapplication; (c) any product altered or repaired by others than Dixon; and (d) to normal maintenance services and the replacement of service items (such as washers, gaskets and lubricants) made in connection with such services. To the extent permitted by law, this limited warranty shall extend only to the buyer and any other person reasonably expected to use or consume the goods who is injured in person by any breach of the warranty. No action may be brought against Dixon for an alleged breach of warranty unless such action is instituted within one (1) year from the date the cause of action accrues. This limited warranty shall be construed and enforced to the fullest extent allowable by applicable law.
|
|
|