Our live chat servers are currently down. If you need assistance please call us at 877-304-3165 or email us at sales@austenitex.com and we will reply as quickly as possible.
Our website is under maintenance. If you have any problems in placing orders please email us at sales@austenitex.com or call us at 302.504.3100
Austenitex will be closed on Monday, September 5th in observance of labor day. Normal business operation will resume September 6th.
Dixon Smooth ID Center Punch Band Clamps are recommended for use in applications where conditions are highly corrosive. These smooth band clamps are double wrapped and locked with the conical punch of the F100 tool. The unique dimple design offers excellent sealing strength while maintaining radial compression and the heavy buckle provides optimal holding power. These low profile band clamps are ideal for thin wall hose. Smooth ID Center Punch Band Clamps come pre-formed in a given diameter with the tailpiece already through the buckle and must be slipped over the hose end before the fitting is inserted. Only available in 201 Stainless Steel. Sold in package quantities, quantity varies with size of clamp. Please reference chart below for bandwidth and package quantity for these Smooth ID Center Punch Dixon Band Clamps.
The use of band style clamps is a proven method of retaining hose couplings in industrial hose applications. To achieve proper retention and sealing of the hose coupling in the hose, it is imperative that these clamps be installed correctly. Please follow the manufacturer’s recommendations as to the proper selection and installation of band clamps. When installing multiple clamps the buckles must be offset around the hose, eliminating the possibility of a straight line leak under the buckle area.
The first clamp should be installed just inside the mark on the hose furthermost from the hose end (reference page 11). Leaving excess band material turned back over the buckle does not improve the performance of the clamp. In fact, a safety hazard develops from this practice by leaving sharp edged material exposed.
General Hose Assembly Safety
Use Dixon couplings, retention devices and accessory products only for their intended service.
All recommendations of the Hose Manufacturer, and the Coupling Manufacturer, must be employed with regards to Size, Temperature, Application, Media, and Pressure when selecting the components for a hose assembly.
All finished hose assemblies should be tested in accordance with the Rubber Manufacturers Association recommendations.
All hose assemblies should be thoroughly inspected prior to each use to insure they are undamaged, and properly coupled.
Use safety clips on couplings, and King Safety Cables on assemblies where required by the manufacturer, as well as State and Federal regulations.
If the clamp ID (Inside Diameter) is too large when using a pneumatic tensioning device (air tool) the clamp may not be tensioned properly.
If the clamp ID is too large when using a hand tensioning tool (punch tool or screw-action tool) the installation process takes longer than necessary.
If the clamp ID is too small, it may be difficult or impossible to properly position the clamps for tensioning after the coupling is inserted.
Failure to correctly install band clamps and inspect them on a regular basis could lead to an assembly failure. Assembly failure can result in damage to equipment and/or serious injury or death to personnel.
DIXON VALVE AND COUPLING COMPANY (herein called "Dixon") warrants the products described herein, and manufactured by Dixon to be free from defects in material and workmanship for a period of one (1) year from date of shipment by Dixon under normal use and service. It's sole obligation under this warranty being limited to repairing or replacing, as hereinafter provided, at its option any product found to Dixon's satisfaction to be defective upon examination by it, provided that such product shall be returned for inspection to Dixon's factory within three (3) months after discovery of the defect. The repair or replacement of defective products will be made without charge for parts or labor. This warranty shall not apply to: (a) parts or products not manufactured by Dixon, the warranty of such items being limited to the actual warranty extended to Dixon by its supplier; (b) any product that has been subject to abuse, negligence, accident, or misapplication; (c) any product altered or repaired by others than Dixon; and (d) to normal maintenance services and the replacement of service items (such as washers, gaskets and lubricants) made in connection with such services. To the extent permitted by law, this limited warranty shall extend only to the buyer and any other person reasonably expected to use or consume the goods who is injured in person by any breach of the warranty. No action may be brought against Dixon for an alleged breach of warranty unless such action is instituted within one (1) year from the date the cause of action accrues. This limited warranty shall be construed and enforced to the fullest extent allowable by applicable law.