|
Check ValvesDixon Sanitary HSC Spring Check Valve Repair Kit
Dixon Sanitary HSC Spring Check Valve Repair Kit
Dixon Sanitary HSC Spring Check Valve Repair kits are available in either FKM or EPDM. 1/2" & 3/4" kit includes one Body Gasket, one Plunger O-Ring, and one Spider O-Ring. 1" and larger repair kits contain one Body Gasket and one Plunge O-Ring. Disassembly- WARNING: Relieve fluid pressure in the line before disassembling the valve. Do use caution and wear protective clothing if spring check valve has been used in applications using acids or other chemicals that may be harmful.
- 1. Loosen the wing nut and remove the body clamp (6) from the center of the valve.
- 2. Carefully separate the body halves.
- 3. Lift off the upper body (7). For 1/2" and 3/4" sizes, remove spider (8) and spider O-ring (9).
- 4. Remove the spring (4) and the plunger (3).
- 5. If necessary, remove the plunger O-ring (2) using a small screwdriver. Be careful as to not damage the plunger or O-ring.
Assembly- 1. Place the body halves on a flat surface with clamp ends down.
- 2. Carefully slide plunger O-ring (2) into the plunger O-ring groove.
- 3. Set the plunger (3) down onto the sealing surface of the lower body.
- 4. Slide the spring (4) down onto the plunger stem.
- 5. Place body gasket (5) on lower body (1).
- a. For 1/2" and 3/4" sizes:
- i. Install spider O-ring (9) in upper body (7).
- ii. Install spider (8), with plunger bushing facing up, in upper body (7).
- iii. Set body gasket (5) on upper body (7).
- 6. Slide upper body spider bushing over plunger stem and compress the spring until body halves and gasket meet.
- a. For 1/2" and 3/4" sizes:
- i. Grab upper body, spider O-ring, spider, and body gasket and slide spider onto plunger compressing the spring until body halves and gasket meet.
- 7. While holding the body halves together, put body clamp around the center of the valve body and tighten wing nut.
Safety Note Details:
Prop 65 Warning:
Dixon HSC Butterfly Valve Repair Kits |
Part # |
Size |
Material |
HSC-RKV050 | 1/2" | FKM |
HSC-RKV075 | 3/4" | FKM |
HSC-RKV100 | 1" | FKM |
HSC-RKV150 | 1-1/2" | FKM |
HSC-RKV200 | 2" | FKM |
HSC-RKV250 | 2-1/2" | FKM |
HSC-RKV300 | 3" | FKM |
HSC-RKV400 | 4" | FKM |
HSC-RKE050 | 1/2" | EPDM |
HSC-RKE075 | 3/4" | EPDM |
HSC-RKE100 | 1" | EPDM |
HSC-RKE150 | 1-1/2" | EPDM |
HSC-RKE200 | 2" | EPDM |
HSC-RKE250 | 2-1/2" | EPDM |
HSC-RKE300 | 3" | EPDM |
HSC-RKE400 | 4" | EPDM |
Rotate your screen to see additional columns.
|
1 Year Limited Warranty DetailsDIXON VALVE AND COUPLING COMPANY (herein called "Dixon") warrants the products described herein, and manufactured by Dixon to be free from defects in material and workmanship for a period of one (1) year from date of shipment by Dixon under normal use and service. It's sole obligation under this warranty being limited to repairing or replacing, as hereinafter provided, at its option any product found to Dixon's satisfaction to be defective upon examination by it, provided that such product shall be returned for inspection to Dixon's factory within three (3) months after discovery of the defect. The repair or replacement of defective products will be made without charge for parts or labor. This warranty shall not apply to: (a) parts or products not manufactured by Dixon, the warranty of such items being limited to the actual warranty extended to Dixon by its supplier; (b) any product that has been subject to abuse, negligence, accident, or misapplication; (c) any product altered or repaired by others than Dixon; and (d) to normal maintenance services and the replacement of service items (such as washers, gaskets and lubricants) made in connection with such services. To the extent permitted by law, this limited warranty shall extend only to the buyer and any other person reasonably expected to use or consume the goods who is injured in person by any breach of the warranty. No action may be brought against Dixon for an alleged breach of warranty unless such action is instituted within one (1) year from the date the cause of action accrues. This limited warranty shall be construed and enforced to the fullest extent allowable by applicable law.
|
|
|