|
Welding ToolsFurick Cup Diffuser Screen Install Tool (for FUPA / Moose Knuckle)
Furick Cup Diffuser Screen Install Tool (for FUPA / Moose Knuckle)
Part # : ITFM332
Price : $5.00
Use the Furick Cup Diffuser Install Tool to get the perfect screen insertion every time! This tool works for both the #12 FUPA and #14 Moose Knuckle welding cups. Precision machined from PVC for a slick, easy to use, and durable tool. Installation is a breeze, just following these 3 simple steps. - Step 1 – Install the empty Glass or Ceramic Cup on your torch with a 3/32" tungsten installed.
- Step 2 – Install the screen over the Tungsten, cupped side first.
- Step 3 – Slide on plastic tool in and evenly apply pressure to the side flange of tool, with a little pressure the screen should seat in the Cup perfectly.
- Note - You want the screen to look like an hour glass when installed with the screens sealing against the sidewalls of the glass/ceramic.
- Note - You may have to Cup the screen with your fingers more if it snags on the Ceramic.
Safety Note Details:
Prop 65 Warning:
Furick Cup Sizing Chart |
Cup |
Size |
CFH |
Polarity |
Material Options |
Ally5 | #5 | 15-20 CFH | AC/DC | Glass Only |
#8 Pro | #8 | 15-20 CFH | AC/DC | Glass or Ceramic |
Jazzy | #10 | 20-25 CFH | DC | Glass or Ceramic |
FUPA | #12 | 25-30 CFH | DC | Glass or Ceramic |
Moose Knuckle | #14 | 25-30 CFH | DC | Glass or Ceramic |
BBW | #16 | 30-35 CFH | DC | Glass or Ceramic |
BBW Cippy | #16 | 30-40 CFH | DC | Thermoplastic |
BBWSG | #16 | 30-40 CFH | DC | Glass or Ceramic |
SSBBW | #20 | 35-40 CFH | DC | Glass/Ceramic Hybrid |
Rotate your screen to see additional columns.
|
|
|
|