|
Dixon F38 Band Clamp Portable Locking Handle Tool (for 3/8" and 5/8" Band Clamps)
Dixon F38 Band Clamp Portable Locking Handle Tool (for 3/8" and 5/8" Band Clamps)
Part # : F38
Price : $86.84
The F38 Band Clamp Installation Tool is a small, portable, hand tool for installation both 3/8" and 5/8" Dixon F Series Band Clamps. Constructed from steel with a rubber handle and measures in at 10 inches. Operating Instructions for the F38 Installation Tool- Push end of clamp completely into slotted end of clamp tool. For 3/8" width clamp use narrow slotted end.
- Push winder into frame with slot engaging clamp end. Ratchet wrench attached to winder.
- Push forward with sufficient strokes until desired tension is obtained.
- Push punch down on lock and while holding tension with wrench, strike firm blow with hammer, thus locking the clamp.
- Raise punch and while holding tension with wrench, swing frame forward and up against edge of lock, breaking off tail piece.
(optional) Peen corners of the lock smooth. Twist up tail and when it is free, pull out of winder. To move punch from one end to other end, squeeze legs of punch holder and reengage in holes at opposite end. - To use open end clamps, wrap and lace the clamp twice around, threading each wrap through the lock, apply clamp-tool and use as above.
Note: On applications such as glass, radiator spud or objects where punching would be injurious, pull tension - raise clamp tool to bend strip at right angle - remove winder - clip off 1/4" above the bend - fold end, close over lock.
Safety Note Details:
Prop 65 Warning:
Rotate your screen to see additional columns.
|
1 Year Limited Warranty DetailsDIXON VALVE AND COUPLING COMPANY (herein called "Dixon") warrants the products described herein, and manufactured by Dixon to be free from defects in material and workmanship for a period of one (1) year from date of shipment by Dixon under normal use and service. It's sole obligation under this warranty being limited to repairing or replacing, as hereinafter provided, at its option any product found to Dixon's satisfaction to be defective upon examination by it, provided that such product shall be returned for inspection to Dixon's factory within three (3) months after discovery of the defect. The repair or replacement of defective products will be made without charge for parts or labor. This warranty shall not apply to: (a) parts or products not manufactured by Dixon, the warranty of such items being limited to the actual warranty extended to Dixon by its supplier; (b) any product that has been subject to abuse, negligence, accident, or misapplication; (c) any product altered or repaired by others than Dixon; and (d) to normal maintenance services and the replacement of service items (such as washers, gaskets and lubricants) made in connection with such services. To the extent permitted by law, this limited warranty shall extend only to the buyer and any other person reasonably expected to use or consume the goods who is injured in person by any breach of the warranty. No action may be brought against Dixon for an alleged breach of warranty unless such action is instituted within one (1) year from the date the cause of action accrues. This limited warranty shall be construed and enforced to the fullest extent allowable by applicable law.
|
|
|